ronniesonora on "First Boot, Power LED turns on but Heatsink+powersupply...
Well, evidently WiSeIVIaN has!
View ArticleXhi on "First Boot, Power LED turns on but Heatsink+powersupply fan+casefan...
Then I recommend he carefully read the wires and the motherboard. Not much other help can be given until that happens.
View Articleraphoenix on "First Boot, Power LED turns on but Heatsink+powersupply...
Section 2.9 in the Manual gives Detailed Pictures and Pinouts of all Connectors on the H61M-DGS MB.There is NO Need to Play around with connectors as everything is straight forward in the Manual.Is in...
View ArticleXhi on "First Boot, Power LED turns on but Heatsink+powersupply fan+casefan...
Link to get the PDF Manual http://www.asrock.com/mb/overview.asp?cat=Manual&Model=H61M-DGS , however, OP must have it or he could not have posted the pictures above.
View ArticleLadyFitzgerald on "First Boot, Power LED turns on but Heatsink+powersupply...
"They are labeled and usually the case wires are also labled PLED, Peset, Powr Button, etc. You can't hardly go wrong."Not necessarily. I had the pretty much the same same thing happen (the fans would...
View ArticleTucats on "(Solved) - Need some help adding the old HD"
About 9 months ago I build a new PC because my old one would not turn on. I said someday that I would add the old 160GB hard drive to my new PC and recover the files on it. I have lots of genealogy and...
View Articleraphoenix on "(Solved) - Need some help adding the old HD"
What is the Model Number of the New PC Motherboard ??Is the Old Hard Drive a SATA or an IDE Model ??
View ArticleTucats on "(Solved) - Need some help adding the old HD"
Model # of the new PC Motherboard is Gigabyte A75M-D2H with an AMD FM1 Socket and the HD is SATA. Looking at the old HD it appears to be IDE (it has a ribbon connector and 4 pin power connector). I bet...
View Articleraphoenix on "(Solved) - Need some help adding the old HD"
No just need an IDE to SATA adapter.The Mods know of some good inexpensive ones.Stand by until they answer.
View ArticleTucats on "(Solved) - Need some help adding the old HD"
I do have a new ULTRA SATA cable kit that has one 4 pin to SATA power adaptor (4 inch) and one SATA to SATA data cable. I guess I would need a SATA to IDE data cable.
View ArticleXhi on "(Solved) - Need some help adding the old HD"
Cables to Go USB 2.0 to IDE or Serial-ATA Drive Adapter, Black
View ArticlePainrequiem on "Gaming Desktop, need help"
Hi guys, I've been wanting to build a Desktop meant for gaming at medium-resolution (especially GW2, WOW and LOL), with a maximum budget of 600€, and so I've asked a few friends for opinions. But then,...
View Articleronniesonora on "Gaming Desktop, need help"
Personally, I would go with the Intel but I would use this CPU and mother board and this HDD...
View ArticleTucats on "(Solved) - Need some help adding the old HD"
Ok thanks, I'll get one of those. But when I eventually install the old hard drive will there be any issues with it having Win XP on it as an operating system? My PC now boots up in Windows 7.
View Articleraphoenix on "(Solved) - Need some help adding the old HD"
NO issues as long as you keep the Bios set to boot from the Windows 7 SATA Disk.
View ArticleWiSeIVIaN on "First Boot, Power LED turns on but Heatsink+powersupply...
Thanks for the thoughts/help guys!!! I posted on another forum and got this answer which saved me. Appearantly I had an intended 3.5floppA small power connected plugged into a fan port for no reason...
View Articleronniesonora on "First Boot, Power LED turns on but Heatsink+powersupply...
WiSeIVIaN, thanks for letting us know what is was. It happens to the best!
View ArticleCianED on "Need help choosing PSU"
So the NewEgg wattage calculator said the system requires 512w, so what wattage should I actually go for? I was thinking maybe 600w or 650w just in case I wanted to get a better CPU cooler to...
View Article
